Skip to main content

How to calculate Design Pressure, when Working pressure is known for Unfired Pressure Vessel like Boiler, Reactor and Storage Tank, etc?


Design pressure can be calculated by adding 5 - 10% in working pressure.

For Example: If Working Pressure of Reactor is 5 Kgf, then what is the Design pressure to take in calculation for Reactor (Unfired Pressure Vessel)?

Solution: Working Pressure = 5 Kgf
                Design Pressure   = 5 Kgf + 5%
                                               = 5 Kgf + 0.25 Kgf
                                               = 5.25 Kgf  

Comments

  1. Technogeekscs19 February 2020 at 17:48

    I am really enjoying reading your well written articles. It looks like you spend a lot of effort and time on your blog. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work. Pressure Vessel Singapore

    ReplyDelete
  2. Unknown13 April 2020 at 11:06

    👌👌👌👌

    ReplyDelete

Post a Comment

If you have any doubts, please let me know

Popular posts from this blog

Sugar Mill Roller Grooves

SUGAR MILL ROLLER GROOVING     The three rolls of a conventional mill are arranged in a triangle so that the fiber is squeezed twice between the top roll and the feed roll and the top roll and the discharge roll. The rolls have cast iron, grooved shells mounted on steel shafts. Fiber passing between the top and feed roll is conducted over a turner plate to the discharge roll. The rolls are pinion driven from the top roll which is driven at a speed of 3 to 6 rpm by a gear reduction system. The feed and discharge rolls are fixed, while the top roll is free to move up and down by means of a hydraulic pressure system. Cane is moved between mills by means of intermediate conveyors. They are generally rake or drag-slat type, which carry the fiber to a fixed chute leading to the next mill. 1)       Circumferential Grooves a)       Cutting grooves around the roll gives a corrugated surface of increased are...
3 comments
Read more

CRYSTALLIZER DESIGN CALCULATION

Given Data Solute                                                                    : A Solvent                                                                  : B Concentration of Solute                         ...
Post a Comment
Read more

Acetic Anhydride Manufacturing process

Acetic Anhydride Manufacturing process Reaction   RAW MATERIAL REQUIREMENT TO MAKE 1 METRIC TON ACETIC ANHYDRIDE Acetaldehyde                     : 1200 kg Catalyst                              : 1 kg Diluent (less recovery)         : 1650 kg Air                                      : Variable Air is bubbled through liquid Acetaldehyde in a reactor in the presence of 2% (based on the weight of Acetaldehyde) catalyst, such as a mixture of copper and cobalt acetates or manganese acetate, which prevents the forma...
Post a Comment
Read more